Indoors Out follows the installation of a waterfall in a backyard makeover.
Video Rating: 5 / 5
Lowe’s home improvement expert, Mike Kraft, gives helpful tips on how to use a power edger. Learn how to use a lawn edger for garden beds, pathways and roads to give your lawn a professional look. For more outdoor power equipment advice and how-to videos, visit www.Lowes.com
Video Rating: 4 / 5
Watch how a fiberglass window is made via a process called pultrusion.
Video Rating: 4 / 5
Lowe’s home improvement expert, Mike Kraft, demonstrates an important part in the fence installation process. In this video, learn how to properly hang a wooden fence gate so you can easily get in and out of your yard. The first step is the measure the distance between the gate posts, adjusting for hinge and latch space. Then, cut the vertical rails for the gate sides. After cutting, you can assemble the frame with screws. Once you have completed the frame, add pickets, making sure they line up with the top of the gate frame. Follow up by attaching the pickets with nails. After these steps, you should be ready to hang your new wood fence gate. Set the gate on blocks to the desired position and attach the hinges with screws. After you are done, simply place the new latch on the gate, following the manufacturer’s instructions. To learn more about wood fence installation or to find the printable instructions for this video, visit www.Lowes.com
Video Rating: 5 / 5
Lowe’s home improvement expert, Mike Kraft, shows how to install a vinyl gate when building a new fence. First, measure the clearance for the gate and hinges. Lay a wooden board on the ground to mark where the gate will be, and then mark the position of the next post. Dig the hole and set the post inside. After filling with concrete, it is time to install the gate hardware. Make sure to attach all gate hinges before hanging the actual vinyl gate. Once the hardware is in place, set the gate on wood blocks to the desired height. To finish off the gate, screw in the hinges, handle and latch lever. The only steps remaining in the fence installation process is adding vinyl fence post caps. Simply insert vinyl cement inside the post cap and place on top of your fence posts. To learn more about fencing installation and to find the printable instructions for this video, visit www.Lowes.com
Video Rating: 5 / 5
Lowe’s home improvement expert, Mike Kraft, gives helpful tips on how to maintain the health of your lawn. In Part 3 of this lawn care series, learn the tricks to overseeding an exisiting lawn. The first step to overseeding is picking the right grass seed. Make sure to check that there is low weed content before buying. Then, use a seed spreader to distribute grass seed in a criss-cross pattern over your lawn. Once applied, do not cover with straw as weeds could begin to grow. If you are concerned with birds, try a seed starter mat. To find the remaining lawn care videos on watering and general maintenance, visit www.Lowes.com
Video Rating: 5 / 5
